 |
| |
For a full product spec please download our product document.
 This document is an Adobe pdf file, if you cannot view the document then please download the software from here [download]
|
| |
|
| MCT 360-Exd, classified Ex II 2 GD, is designed for use in Zone 2 gaseous or dust atmospheres. Zone 2 being defined as an area where a dangerous explosive atmosphere is unlikely to occur or will occur for a short period only. Protection is afforded by a cast aluminium flameproof enclosure.
Please note that this gauge has no connectors, it is hard wired - all cabling is through conduit. Digital and analog outputs require specifying upon ordering.
Features
- Ex II 2 GD...marking
Additional marking is dependent on the application the gauge is required for. Enclosures are available for T3 to T6 gases (maximum surface temperature: 200°C - 85°C).
- Stand-alone “smart” sensor design
All data processing is completed within the sensor head eliminating the need for separate data boxes, and interconnecting cables simplifying installation.
- Up to 3 constituents
Multiple measurements from a single sensor providing useful information for better process control without incurring additional installation and maintenance costs
- Non Contact Measurement
Minimal cleaning and maintenance
- Instantaneous on-line measurement
Ensures timely corrective action through automated or manual process adjustment
- Choice of outputs direct from the sensor head
Analog, RS232/485 and/or network options. The MCT 360 Exd communicates directly to the plant’s data highway and can be simply reconfigured if he protocol changes
- Pre Calibrated for Rapid Set-Up
- Simple and reliable operation
Adjustments, if required, are made using a minimal number of key strokes via the Intuitive Operator Interface or Viewer PC software.
- Measurement Confidence
Robust measurement algorithms combined with dual beam single detector technology result in stolid measurement performance
|
|
